Small organic fertilizer plant powder organic fertilizer production
line for sale
Organic powder fertilizer granulation production line
The organic fertilizer production line project planned by our
company for you is a high-tech project with significant economic
and environmental benefits through the use of microbial
fermentation and organic waste granulation to produce organic
fertilizer.
Process flow
1. Mainly organic waste materials (cow dung, sheep dung, pig dung,
chicken dung, sludge, rice straw, corn stalks, mushroom residue)
and other animal dung organic wastes are fermented and decomposed.
The moisture content is about 30%-35%. After the waste is crushed
and screened, it is measured with the binder (bentonite, humic
acid) and other ingredients that need to be proportioned in the
batching mixing system according to the proportioning requirements.
(Adding functional bacteria can produce bio-organic fertilizer,
adding nitrogen , Phosphorus and potassium (the total nutrient
content is less than 15%) can produce organic and inorganic
fertilizers) ingredients, mix, the fully mixed materials are
uniformly and continuously fed into the granulator by the belt
conveyor, and then rounded into a ball by the polishing and shaping
machine The pellets are cooled and sieved after being dried by a
dryer at low temperature and large air volume. The finished pellets
are conveyed to the finished product silo by a belt, and are
measured and packed into the warehouse by the computerized
quantitative packaging system.
Organic powder fertilizer granulation production line
1.Strong adaptability. Suitable for the different formulations,
different moisture content, and different concentrations of the
compound fertilizer and organic fertilizer.
2.Unique drying and cooling processing and handling. It can be
sufficient to drying and cooling material, and again spheronization
and polishing on pellets.
3.Low temperature drying technology. It can produce the rich in
active microbial ecological fertilizer.
4.Advanced technological processing design. The advantage of
equipment layout is reasonable, compact structure, small spatial
footprint.
5.Using the rotary drum dryer by the main hosts of system. The
advantage is strong adaptability, easy operation, and running
stability, and most reliability.
6.The hot air furnace could choose oil, gas, coal, biomass and
other efficient automatic (or manual) hot air furnace as heat
source. The advantage is reasonable design, high thermal
efficiency, and low drying cost.
7.Unique sealing device. It can be increasing the efficiency,
without dust particles, and improve the operating environment
8.Suitable for the different desired customers that have different
production capacity requirement. For example, the requirement
capacity of 1-20 million tons per year.
